The Good and Bad of Precast Piles

The most common type of them, a precast concrete pile is a deep foundation used to transfer loads from a upper, soft layer of soil to a hardar, capable lower layer. They can be rectangular, square, round or polygonal in shape. Extra reinforcements are provided in the concrete so as to provide support for the forces received before the instalent.

The precast concrete piles are constructed in a casting yard. Then they are transported to the required location and installed as necessary.

They are constructed by pouring the concrete in a conventional reinforcement cage. This has several steel bars in horizontal and vertical positions, held together by individual or spiral ties.

Types of Precast Concrete Piles

There are two main categories into which we can divide:

1. Driven Precast Concrete Piles

It is precast in a construction yard and then hammered into the soft ground at the target location. At most they can go up to 40 feet deep.

2. Bored Precast Concrete Piles

After they are made in the construction yard, they are transferred to the target location. The location already has boreholes for the piles; they are just lowered into these holes. Any space remaining between the bore hole and the pile is grouted.

Difference between the Driven and Bored Precast Concrete Piles

1. Bored piles are better in urban locations since they avoid the noise and vibrations caused by vibrators.
2. The bore hole can be as deep as necessary, or as deep as the machinery can go. Unlike driven piles, the bore piles have no depth limit.
3. Driven piles can be established quickly.
4. Driven piles can be easily used underwater.

The good and the bad about Precast Concrete Piles

Advantages of Precast concrete piles

A. Increases the bearing capacity of the soil
B. Flexible in sizes and shapes
C. Faster to produce due to standardized manufacture
D. Faster project progression when piles available

E. Reinforcements stay in the same position
F. Can be driven underwater
G. No need to wait for pile to mature
H. Building structures beside does not disturb them
I. Highly resistant to corrosive effects
J. No waste generation
K. Very economic
L. Can withstand high tension loads

Disadvantages of Precast concrete piles

1. Heavy weight requires specialized equipment and infrastructure
2. Need to be careful while transporting
3. Driven precast concrete piles require specialized machinery to drive them
4. Requires extra reinforcements to withstand transportation strain
5. Size of the piles are limited by transport ability and construction yard
6. Cannot change anything in the field
7. Difficult nd uneconomical to cut the pile
8. Not available on short notice

Important information to be kept in mind

A. The Precast concrete piles can be up to 20 meters long only. To increase the length of the structure, two or more piles need to be joined together.
B. In case of driven piles, additional reinforcements need to be provided in order to withstand the hammering.
C. You must use M25 grade concrete to make Precast concrete piles.
D. Site investigation needs to be carried out according to IS 1892.
E. Chemical properties of the soil needs to be analysed and countered accordingly when manufacturing the piles.
F. Design of driven piles should conform to IS 2911 1.3 and bored piles should conform IS 2911 1.4.

The Good and Bad of Precast Piles