What you need to know About Floor & Wall Tiles

In terms of size and thickness, wall and floor tiles differ primarily based on the materials used in their production and the type of glossy finish they have.

Materials used to make floor tiles and wall tiles may differ. However, each tile serves a different purpose. Since the floor is subject to heavy traffic and must support the wear and tear caused by heavy traffic, the tiles for this area need to be stronger than those used for the walls.

Being a bit of an information junky isn't necessarily a bad thing. First, let's take a look at the basics of tiles before offering up the comparison chart.

Load Types

There is a great deal of wear and tear on tiles as a result of heavy traffic. These tiles, therefore, need to be thick to be strong. As there is zero possibility of this tile falling, it is designed with a larger size so that there are fewer joints, and this increases its aesthetics.

Traffic load and abrasive wear and tear do not affect the abrasiveness of wall tiles. Therefore, they can have less resilience and are thinner. Although they weigh down by gravity, they are always attracted to it. The weight of the products should minimize. That happens so that the thin texture is also maintained. It would be unnecessary to increase the width if you increased the thickness, so it may fall over time if you increase the thickness.

Sizes

Weight is not a problem for floor tiles since they can be large, thick, and so on.

Although floors are thicker than walls, both tiles appear the same from an appearance perspective. Even though their size seems the same, floor tiles have the privilege of requiring fewer joints during installation, mostly due to the larger size.

The tiles on walls usually have a smaller size and a thinner texture because they must be lightweight. Tiles for the floor and the wall appear identical, but the floor tile is usually lighter and smaller in size than wall tiles.

Manufacturing

Floor tiles can withstand pressure and wear and tear while being highly durable. The unique construction of these tiles allows them to withstand greater pressure than standard floor tiles.

Durability

The tiles on the floor are more durable than those on the walls. Pressure is less likely to damage these tiles. Floor tiles can withstand much more pressure than wall tiles because they are more durable. Wall tiles have thin textures, which results in this problem.

Fittings of Tiles

The fitting of wall and floor tiles happens using the same method. Layout the tiles on the surface you are preparing for fitting. You can cut the tiles if needed in the next step after applying the adhesive. Tiles should grout after setting.

Due to their thickness and weight, floor tiles are difficult to size and install. Moreover, when calculating the tiles' length and width and their surface area, you have to take into consideration the surface area of each tile.

Wall tile is easier to shape, size, and install wall tiles due to their thin and light design. Normally, a white chalk section is drawn on the wall before they fix it. Tiles can also be fixed using bolting techniques. In calculating the tile installation cost, you should take into account the tile's length and height, as well as the surface area.

Maintenance

The maintenance requirements for floor tiles are higher. Compared to wall tiles, floor tiles have a longer life expectancy. A quick replacement will be required if you use floor tiles as wall tiles.

Wall tiles have a lifespan of more than 75 years if installed correctly. To clean it daily, special detergents are needed. Water and soap are enough to clean tiles on the wall. They require little maintenance.

Wrapping it Up

Residential and commercial buildings use tiles for both indoor and outdoor areas. By installing these tiles, the area gains a more sophisticated look while also becoming easier to maintain. It is often difficult for beginners to decide between the various types of tiles on the market.

In modern home decoration, tiles play a crucial role. Creating beautiful indoor settings, improved function, and ease of maintenance is the aim of modern home decor, a kind of environment-friendly architectural art. The construction materials, colors, furniture, and architectural elements should all be eco-friendly.

To learn more, watch the following video tutorial.

Video Source: Engineering Motive

They serve as decoration for different surfaces of buildings, including walls, floors, roofs, etc. Inorganic tiles, such as ceramic ones, are made with clay or other raw materials and can be glazed or unglazed.